On the other hand, if you are not careful enough, different cleaning chemicals can react in various ways and mess the original paint.
But, it doesn’t have to be this way.
We have a simple solution for you. In this article, we will tell you how to remove paint from firearm lettering and leave your gun paint untouched. It is very common with BB airguns or cybergun to have a lot of white warning descriptions on one or each side. With our guide, you will learn how to remove it without damaging the surface of the gun.
NOTE: Bear in mind that the large, heavy bright colored lettering will be hard to remove. So, we don’t necessarily recommend this method for the writings like these. It can destroy the original paint of the gun and make a real mess.
How to Remove the White Writing on Your Gun?
Using Gun Blue Pen
For the lettering removal, we have used Gun Blue Pen. You won’t have any problems finding it because you can purchase it online or in some firearm store near you. The one we are recommending is the Presto Gun Blue Pen form the Birchwood Casey, which is an ideal product for the processes like these.
The thing you need to remember is that it won’t finish the job immediately. You do have to work for it, but if you make more time for it, that won’t be a problem. Although it may take longer than you have expected, this is the most efficient way to cover and remove all the letterings form your gun.
At the beginning of this removal process, you will notice that it slightly changes the color. For the better effect, try to cover part by part, taking your time. Speaking of time, it is essential to properly do this task, and make the time for it, so you won’t mess the paint and ruin your pistol. So, we recommend not to use the pen on the full warning descriptions.
It was said that for some of the best things in life you have to work for. We couldn’t agree more. Especially, when it comes to the task like this one, where the patience is the key to success.
Continue the job by pressing the pen pretty hard, to get into every letter of the gun. You should also try to work from different angles. That will make the job easier and speed up the process. After some time you will notice that it is working well.
After a few minutes, you will notice that the pen has covered the first part and that it looks great. But, you need to know that it won’t remove it hundred percent. You will surely see the difference, which is why we have started this task. Just keep working on it, because over time it will get into the ink or the white paint. It is almost like the pen is dissolving the color and replacing it with the darker color.
After you have covered all the parts of the warning description or any other white letterings, you need to leave the gun to sit for a while. It is time to be patient one more time, but the great thing about this job is that you will need to do it only this one time.
After twenty or more minutes, you can continue to work on the task. As we mentioned before, you just have to be patent and keep with the process until you see that the white lettering is disappearing. After you have finished the job, leave the gun to sit for another 30 minutes.
The great thing about this pen is that it can fix other areas on the firearm that are slightly damaged. To be precise, where the paint started to peel off, just use your Gun Blue Pen on this spots and you will notice how it softens any high spots where the color came off. We can guarantee you it will be a lot less noticeable.
So, this pen can be used for a lot of reasons. You can also color the edges of the weapon which will give it a new shine. The one thing we did notice is that it can be used on really bright letterings also. You just have to work even harder to get to every letter of the gun. And once again a lot of patience will help you to finish the job properly.
You will surely like the results. In our opinion, everything is better than the white letterings which are very noticeable. Just use this pen to cover them, and leave the gun for some time to sit.
Using Gun Paint
Of course, there is another solution to this problem, and that is to repaint your weapon. We have written about great products on the market that you can purchase for a reasonable price and paint your gun by yourself. It is a straightforward and simple job.
You should check our latest reviews and read more about these gun spray paints that will surely grab your attention. The best part is that you won’t have to spend a lot of money, and you will learn how to repaint your weapon in no time! Just follow their directions, and you will soon be painting like a pro.
Conclusion
We are always trying to find the easiest solutions to fix our gun problems. The Gun Blue Pen is one of them. It is a great product that will cover and remove all the white letterings from your gun.
It might take you some time, but for this job, the patience is the key if you want to succeed. We hope that this article was helpful and made your task a lot easier!
